我们生产的中空板设备，采用不同的螺杆设计及机械配置，可生产多种规格的PC、PP中空板，可生产的最大宽度为2300mm，厚度从
2mm-12mm。此产品广泛用于广告、装饰、隔音、包装等用途，并且因PP中空板具有质轻、强度高、防潮、防腐等优点，已逐步代替了
纸箱，成为做包装箱的首选材料。
挤出机：螺杆的特殊设计，先进的控温系统，确保胶料的塑化良好及高产量稳定挤出。
换网器：选用液压快速换网装置，使换网过程快速有效，双工位和特殊的密封结构，使换网器稳定运转。
模具：模具采用优质合金钢制成,带有高活动性的节流装置,使料流在口模各点压力均匀一致,上下口模的差动调节，确保了上下壁厚的
均匀。
真空定型台：定型系统中开设有快速的热交换制冷系统，并与真空系统有效交错，顺序分布.此种分布确保了定型精度.真空系统由两
个独立的子系统构成，每个子系统均配有多条三点式固定循环真空线，每个固定循环均协带真空调节系统和真空显示系统,这样就使板
材表面的真空度均匀而稳定。
牵引机：牵引机分布有第一及第二组，第一组牵引为大功率、大减速比、多辊式、其低速运转性能优良，牵引力大，能同步均匀地将
板材从真空定型台中牵出。第二组牵引机作去应力处理。另配有切边装置，确保板材边缘质量。
应力消除器：先进的大面积传导加热方式，使板材应力得到有效消除，进一步提高板材的平直度。
切断机：配有精确的瞬间定长切断及自动升降卸料，特殊的合金耐磨刃刀口，保证了板材的切面质量。
整线电器控制：我们不但能够对整线进行传统的面板式自动化控制，也对微电脑(PLC)的使用能够实现对整线所有参数(如：螺杆转
速、温度、压力、产量等)的统一控制，进而有效优化整线运转特性。
Adopted different screw design and specification of machinery, our machine can produce PP or PC hollow sheet of various size(Max. width: 2300mm; thickness range: 2mm-12mm). The products are widely used in the fields of advertisement, decoration, sound-proof, packing. Because it is featured by light-weight, strong, damp proof, anticorrosive advantages, it trends to replace the paper carton gradually and become the first choice to make packing cases.
Extruder: The special designed screw and the advanced temperature control system can ensure the good plasticizing, stable
extrusion and high output.
Screen changer: it is of hydraulic style fast screen changer and ensures the short course of the exchanging filters. Double filters
and special leakage-proof structure guarantee its stable performance.
Die: Made of super quality alloy and adopted adjustable restrictor bars, provide the even pressure of the plastic flow at the die lips.
It ensures even thickness of the board with adjustable lips
Vacuum calibrator: The vacuum system and calibrating system including a heat-convection system array interleaved. This kind of
design guarantees the high precise degree of the calibration. The vacuum system consists of two independent subsystems, which
is equipped with many pieces three point type closed loop vacuum line. Each closed loop is equipped with vacuum regulating
system and vacuum display system. This guarantees the good calibration and the smooth surface of the board.
Take-off unit: There are two haul-off units. First one consists of multi-rolls and is driven by a strong motor with a speed reducer with
a big gear ratio. It has strong take-off strength and performs well at slow speed so that it can draw the board up from the calibrator
evenly and synchronally. Second one is put after the infrared stabilizing oven. The slit unit fixed on the take-off unit ensures the
smooth cut of the edges.
Infrared stabilizing oven: Its advanced huge area conductive heating style can relieve the stress of the products so as to ensure the
board is flat.
Cutting machine: Setting accurate instant fixing-length cutting and automatic ascend and drop unloading system; the special alloy
steel sharp blade ensures a good cut effect.
The electrical control system of the line: Provide two kinds of control system: first: automatic control by the conventional control
panel for the line; Second: a microprocessor unit (PLC) which can act as a central control of the related parameters of the
machines: (screw revolutions, temperatures, pressure, alarms, out-put etc ) and be optimized with the operation characteristics of
the complete line.
本公司供应ANFU安富塑机PP、PC、PE中空板挤出设备质量保证，欢迎咨询洽谈。
